BTXFB - 27 5110 CLEAR WOOD FINISH
- MSDS: BTXFB
- Manufacturer: VALSPAR CORP
- Product Name: 27 5110 CLEAR WOOD FINISH
- National Stock Number: 8010-00N045423
Product Identification
Product ID:27 5110 CLEAR WOOD FINISH
MSDS Date:07/29/1992
FSC:8010
NIIN:00N045423
MSDS Number: BTXFB
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 800-228-5635
Info Phone: 612-332-7371
Cage: 13374
Contractor
Telephone: 612-332-7371
Cage: 91346
Ingredients
KEROSENE (PETROLEUM), HYDROTREATED; (MINERAL SPIRITS)
CAS: 64742-47-8
RTECS: OA5504000
Fraction By Weight: 10%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
RESIDUES (PETROLEUM), CATALYTIC REFORMER FRACTIONATOR;
CAS: 64741-67-9
RTECS: VG7067000
Fraction By Weight: 20%
OSHA PEL 5 MG/M3 (MFR)
ACGIH TLV: 5 MG/M3 (MFR)
KEROSENE; (KEROSINE)
CAS: 8008-20-6
RTECS: OA5500000
Fraction By Weight: 50%
OSHA PEL N/K
ACGIH TLV: 200 PPM (MFR)
SOLVENT NAPHTHA; (SOLVENT NAPHTHA, (PETROLEUM) HEAVY
CAS: 64742-94-5
RTECS: WF3100000
Fraction By Weight: 5%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: N/K
4.33 LBS/GAL
RTECS: 9999999VO
Fraction By Weight: SEE ING
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:HARMFUL IF INHALED. MAY AFFECT
BRAIN, NERVOUS SYSTEM OR RESPIRATORY SYSTEM, CAUSING DIZZINESS,
HEADACHE, NAUSEA OR RESPIRATORY IRRITATION. OVEREXPOSURE TO
INGREDIENTS IN THIS PRODUCT MAY CAUSE N OSE & THROAT IRRITATION,
EYE IRRITATION, SKIN IRRITATION. CHRONIC: EYE DAMAGE & PAIN.
NOTICE:REPORTS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:HAVE ASSOCIATED REPEATED & PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS W/PERMANENT BRAIN & NERVOUS
SYSTEM DAMAGE. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
INHALING CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:EYE:FLUSH IMMEDIATELY W/PLENTY OF WATER FOR AT LEAST 15
MINUTES & GET MEDICAL ATTENTION. SKIN:WASH THOROUGHLY W/SOAP &
WATER. INHAL:IF AFFECTED BY INHALATION OF VAPOR OR SPRAY MIST,
REMOVE TO FRESH AI R. INGEST:IF SWALLOWED, GET MEDICAL ATTENTION
IMMEDIATELY.
Fire Fighting
Flash Point Method:TCC
Flash Point:130F,54C
Lower Limits:1%
Upper Limits:16%
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM &/OR WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT COOL W/WATER
SPRAY.
Unusual Fire/Explosion Hazard:CONTAINS OXIDIZING MATLS. CONTAM RAGS,
WIPES, SAWDUST, ETC MAY CATCH FIRE SPONT. STORE WASTE UNDER WATER
IN CLSD METAL CNTNRS UNTIL DISPOSED OF IN (SUPP DATA)
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING APPARATUS OR AIRMASK
FOR LARGE SPILLS IN A CONFINED AREA. AVOID ALL PERSONAL CONTACT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPKS & OPEN
FLAMES. DO NOT STORE >120F. ALL LBL WARNINGS MUST BE OBSERVED UNTIL
CNTNR HAS BEEN CLEANED/RECONDITIONED.
Other Precautions:BASED ON PROD FLASH POINT & VAP PRESS SUITABLE STOR
SHOULD BE PROVIDED I/A/W OSHA REG 1910.106. EMPTY CNTNRS MAY
CONTAIN PROD RESIDUE, INCL FLAMM/EXPLO VAPS. DO NOT CUT,
PUNCTURE/WELD ON/NEAR CNTNR. K EEP CNTNR CLSD WHEN NOT IN USE.
Exposure Controls
Respiratory Protection:WEAR APPROPRIATE, PROPERLY FITTED NIOSH/MSHA
APPROVED RESPIRATOR DURING & AFTER APPLICATION UNLESS AIR
MONITORING VAPOR/ MIST LEVELS ARE BELOW APPLICABLE LIMITS. FOLLOW
RESPIRATOR MANUFACTURERS DIRECT IONS FOR RESPIRATOR USE.
Ventilation:REQUIRED FOR SPRAYING OR IN A CONFINED AREA, VENTILATION
EQUIPMENT SHOULD BE EXPLOSION PROOF.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORK GOGGLES .
Other Protective Equipment:USUAL CLOTHING FOR PAINTING OPERATIONS.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ:COMPLIANCE W/ALL APPLICABLE REGULATIONS.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:315F,157C
Vapor Pres:2 @ 68F
Vapor Density:5.5
Spec Gravity:0.88
Evaporation Rate & Reference:0.1 (BUTYL ACETATE=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATINGS PRODUCT.
Percent Volatiles by Volume:64.77
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON DIOXIDE/MONOXIDE.
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES W/LOCAL, STATE & FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.